Cooper-instruments-systems Series M3 Digital Force Gage Manuel d'utilisateur télécharger pdf (Page 14)

Series 3 Digital Force Gauges User’s Guide

3. To escape the Calibration menu at any time, press ESCAPE. The display will appear as follows:

Selecting “CANCEL” will revert back to the Calibration setup. Selecting “EXIT W/O SAVING” will

return to the menu without saving changes.

4. After the number of calibration points has been entered, press ENTER. The display will appear as

follows:

5. Place the force gauge horizontally on a level surface free from vibration, then press ZERO. The

gauge will calculate offsets, and the display will appear as follows:

If failed:

6. The following screen appears after the offsets have been calculated:

Attach weight fixtures (brackets, hooks, etc), as required. Do not yet attach any weights or apply

any calibration loads. Then press ENTER.

CALIBRATION

NOT COMPLETE

CANCEL

EXIT W/O SAVING

CALIBRATION

COMPRESSION

Attach necessary

weight fixtures.

THEN PRESS ENTER

CALIBRATION

OFFSET

Sen.Offset Adj.Failed

Ana.Offset Adj.Failed

CALIBRATION

OFFSET

Sen.Offset Adj.Passed

Ana.Offset Adj.Passed

CALIBRATION

OFFSET

Please wait…

CALIBRATION

OFFSET

Place force gauge

horizontal

THEN PRESS ZERO

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 22 23

Pas de commentaire

Cooper-instruments-systems Series M3 Digital Force Gage Manuel d'utilisateur Page 14