Cooper-instruments-systems DFI INFINITY Digital Force Indicator/Controller Manuel d'utilisateur télécharger pdf (Page 42)

“INP.1=1” 50 Hz

Read Rate:

“INP.2=0” Slow

“INP.2=1” Fast

Input Voltage:

“INP.3=0”

Unipolar

“INP.3=1” Bipolar

Transmitter Type:

“INP.4=0”

No Transmitter

“INP.4=1” Not used

“INP.4=2” Not used

“INP.4=3” Not used

Bridge Mode:

“INP.5=0”

Normal Operation

“INP.5=1” Setpoint 1 value would be lower overload limit and

Setpoint 2 value would be upper overload limit.

“INP.6=0” Disabled

“INP.6=1” Enabled

Type of Reading:

“INP.7=0” Non Ratiometric

“INP.7=1” Ratiometric

* The ‘MIN’ button allows you to sequence through INPUT 1, INPUT 2, INPUT 3, INPUT 4, INPUT 5, INPUT 6, and

INPUT 7.

The ‘MAX’ button allows you to select the “0” or “1” state for each “INP” condition.

The ‘MENU’ button stores the selected values for all “IN CNF” condition(s) changed and advances the meter to

“IN.SC.OF”. Do not press the ‘MENU’ button after each change within the submenu or the meter will advance to

the next menu item.

Every underlined “0” or “1” state is the factory preset value.

9.2.5 IN.SC.OF (Input Scale And Offset)

Refer to Section 8 for a detailed discussion of this feature.

Input scale and offset is typically used when you want to scale your meter (using two input data points):

BUTTON

MAIN MENU

MIN/MAX *

BUTTON SUB

MENU 1

MIN/MAX/MENU **

BUTTON

SUB MENU 2

DESCRIPTION

INPUT SCALE OFFSET

Input scale and offset in 2-Coordinate Format

INPUT 1 Item #1 of Coordinate #1.

000000. (“000000.”)

Enter the first value displayed by the meter.

READ 1 Item #2 of Coordinate #1.

000000. (“000000.”)

Enter first desired value.

INPUT 2 Item #1 of Coordinate #2.

000000. (“100000.”) Enter the second value displayed by the meter.

“IN.SC.OF”:

READ 2 Item #2 of Coordinate #2.

CF 67 37 M1291/N/0403 11279ML-02 Rev. A

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 80 81

Commentaires sur ces manuels

Pas de commentaire

Cooper-instruments-systems DFI INFINITY Digital Force Indicator/Controller Manuel d'utilisateur Page 42

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de mesure Cooper-instruments-systems DFI INFINITY Digital Force Indicator/Controller