Cooper-instruments-systems DFR 1250 Two Channel Paperless Recorder Manuel d'utilisateur télécharger pdf (Page 13)

TSFM 500 DC 11 32-1101 REV 2 710

5.11 Units of Speed (UNITS)

Default setting: in/min or RPM

Available settings: in/min, mm/min or RPM, °/sec

5.12 Programmable Button Function (KEYS)

Three button function modes are available:

1. Maintained

The test stand will move continuously once the button has been pressed. Subsequently pressing the UP,

DOWN, or STOP during a test will stop motion.

2. Momentary

The test stand will move only if the button is held down. Releasing the button will stop movement immediately.

3. Auto

Holding down the button for more than 0.5 seconds will enter momentary mode, at which time an audible

indicator will sound and the LED indicator on the button pushed will be illuminated. A short tap on the button will

operate the test stand in maintained mode. Pressing UP, DOWN, or STOP during maintained mode will stop

motion.

Default setting: maintained

Available settings: maintained, momentary, auto

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 21 22

Pas de commentaire

Cooper-instruments-systems DFR 1250 Two Channel Paperless Recorder Manuel d'utilisateur Page 13